There are several things to be aware of when installing a generator set for a hospital

As the power supply equipment of the hospital, the generator set can not replace the other equipment. Xi’an Kunpeng Power Xiaobian hereby pointed out that the function of Xi’an generator set should be maximized, and the quality of the product itself should be removed. Should also be valued.
 
The installation place needs to be air permeable, the generator end should have sufficient air inlet, and the Xi’an generator set should have an excellent air outlet. The air outlet area should be more than 1.5 times the water tank area. The generator set of the hospital is usually installed on the bottom floor of the building. It is very important.

The surrounding area of ​​the installation site should be kept clean to prevent the presence of corrosive gases such as acid and alkali, as well as steam in the vicinity. If necessary, fire extinguishing devices should be installed.
 
In indoor use, the exhaust pipe must be guided outside, the diameter of the pipe must be ≥ the diameter of the pipe of the muffler, and the elbow of the pipe to be connected should not exceed 3, in order to ensure that the pipe is smooth, and the pipe should be down. Skew 5-10 degrees to prevent rainwater injection; if the exhaust pipe is installed vertically upwards, it must be installed with a rain cover.
 
When the concrete is basically selected, the level should be measured with a level gauge during installation, so that the unit is not constant to the level. There should be a special shock pad or a foot bolt between the unit and the basic.
 
The unit casing must have a reliable guard grounding. For generators that require a neutral grounding directly, the neutral grounding must be carried out by professionals, and lightning protection devices should be installed. It is strictly forbidden to use the grounding device of the mains to implement the neutral point directly. Grounding. The two-way switch between the generator and the mains must be exceptionally reliable to prevent reverse power transmission. The wiring of the bidirectional switch needs to be checked by the local power supply.


Post time: Mar-29-2021