What should I do before starting the generator set?

When igniting, the filter of the fuel system should be awakened and seasoned. Under normal conditions, the freezing point of the diesel used should be lower than the minimum temperature of 3-5 °C, so as to ensure that the lowest temperature will not be affected by solidification. In the south of the Yangtze River, the optional 0# light diesel oil can be used in the winter; in the south of the Great Wall and the winter in the south of the industrial area, -20# light diesel oil is used.

 photobank (13)
Change the smooth oil that is suitable for the labor environment, reduce the cycle of the oil filter. Change the antifreeze that is suitable for the ambient temperature, check the labor condition of the thermostat and the pump. Check the atomization of the injector and Oil supply time, check the turbocharger, fuel tank and fuel line, sort out the air filter, and quickly drain the accumulated water and deposits in the fuel tank, and moderately reduce the air filter and fuel filter exchange. Cycle, if necessary, check the oil pump and crank linkage structure to ensure the normal operation of the smooth oil circuit.
The full heating process of this kind of low-temperature ignition method takes 30-40min, and the engine body temperature can be heated to 40-50 °C control. At this time, the engine oil is also heated, the viscosity of the oil is reduced, and the smooth condition of the engine under the premise of low temperature is improved. The engine is properly ignited. The advantages of this type of low-temperature ignition method are obvious, so that the ignition function of the engine under the premise of low-temperature ice cooling is greatly increased. It is proposed to use. Our company still repeatedly chooses such low-temperature ignition method, and the ignition effect is excellent.
The use of unclear diesel fuel in the generator set will cause the fuel system parts to wear out and cause labor to deteriorate. The technical form of the Cummins generator set fuel system has a critical impact on the dynamic economy of Cummins generator sets. Therefore, the value of 250kw diesel generators, diesel purification Not only can it improve the service life of parts such as plungers, but also whether it can be useful and economical to work with Cummins generators. Diesel purification refers to the removal of impurities and moisture from the oil by means of accumulation and filtration before application. Increase the cleanliness of the oil.

Post time: Jun-26-2021